EU9027STE Blower
EU9027STE Blower
Auger Housing / Impeller Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 18 87-03 | Bar, Weight | ||
| 2 | 532 75 11-53 | Nut, Hex Flange 5/16-18 | ||
| 3 | 872 11 05-10 | Bolt, Carriage 5/16-18 x 1/2 | ||
| 4 | 532 19 10-79 | Pulley, Impeller | ||
| 5 | 532 18 89-09 | Bearing Assembly, Flange | ||
| 6 | 532 19 85-41 | Nut, Hex Flange 5/16-18 | ||
| 7 | 532 18 03-55 | Bolt, Flat Head, Carriage 5/16-18 x 5/8 | ||
| 8 | 872 27 05-05 | Bolt, Carriage 5/16-1 8 x 5/8 | ||
| 9 | 532 19 98-79 | Bolt | ||
| 10 | 532 40 77-39 | Housing, Auger | ||
| 11 | 532 40 77-27 | Bar, Scraper | ||
| 12 | 532 18 40-95 | Bracket, Corner Discharge | ||
| 13 | 532 17 53-22 | Base, Discharge Chute | ||
| 14 | 819 11 15-07 | Washer, Flat | ||
| 15 | 532 19 85-52 | Washer, Lock 5/16 | ||
| 16 | 874 95 05-12 | Screw, Hex Head 5/16-18 x 3/4 | ||
| 17 | 532 40 56-37 | Grease Fitting | ||
| 18 | 532 17 95-82 | Screw, Hex Head 5/16 x 1 | ||
| 19 | 873 80 04-00 | Nut, Hex Lock 1/4-20 | ||
| 20 | 532 19 85-41 | Nut, Hex Lock 5/16-18 | ||
| 22 | 532 18 40-94 | Skid Plate, RH | ||
| 25 | 872 27 05-06 | Bolt, Carriage 5/16-18 x 3/4 | ||
| 26 | 532 18 79-25 | Bearing, Auger | ||
| 27 | 532 17 46-97 | Washer, Thrust, 1" | ||
| 28 | 532 19 86-36 | Screw #25-20 x 1-3/4 | ||
| 29 | 532 18 40-93 | Skid Plate, LH | ||
| 30 | 532 40 78-96 | Auger Assembly, RH | ||
| 31 | 532 40 78-95 | Auger Assembly, LH | ||
| 32 | 532 40 77-68 | O-Ring | ||
| 33 | 532 40 77-69 | Bushing, Flange 3/4 | ||
| 34 | 532 17 46-81 | Washer, Thrust 3/4 | ||
| 35 | 532 17 46-84 | Bearing, Thrust 3/4 | ||
| 36 | 532 40 77-57 | Shaft, Impeller | ||
| 37 | 532 17 46-83 | Washer, Thrust 5/8 | ||
| 38 | 532 40 77-58 | Bushing, Flange 5/8 | ||
| 39 | 532 40 77-67 | Screw, Hex Head 5/16-18 x 3/4 | ||
| 40 | 532 40 77-60 | Plug, Case | ||
| 41 | 532 40 77-61 | Housing, Gearbox, RH | ||
| 42 | 532 40 77-70 | Seal, Oil | ||
| 43 | 532 40 77-62 | Bushing, Flange, 1" | ||
| 44 | 532 18 92-82 | Key, Square 1/4 x 1/4 x 7/8 | ||
| 45 | 532 40 77-63 | Gear, Worm | ||
| 46 | 532 40 77-64 | Shaft, Auger | ||
| 47 | 532 40 77-65 | Housing, Gearbox, LH | ||
| 48 | 532 18 41-05 | Impeller Assembly | ||
| 49 | 874 78 04-26 | Screw, Hex Head 1/4-20 x 1-5/8 | ||
| 50 | 532 40 77-66 | Gasket, Gearbox | ||
| 51 | 532 18 42-05 | Pin, Roll 3/16 x 1-1/8 | ||
| 55 | 532 19 86-38 | Spacer | ||
| 56 | 532 18 06-84 | Multi-Wrench | ||
| 57 | 532 19 67-10 | Gearbox Assembly | ||
| 58 | 532 18 81-70 | Bearing Retainer, Plastic |
Control Panel / Discharge Chute
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 18 33-34 | Knob, Lever | ||
| 2 | 817 50 10-10 | Screw #10-24 x 5/8 | ||
| 3 | 532 19 84-75 | Control Assembly, De?ector | ||
| 4 | 873 80 06-00 | Nut, Lock 3/8-16 | ||
| 5 | 819 13 13-16 | Washer, Flat 3/8 | ||
| 6 | 532 40 49-74 | Control Assembly, Chute Rotater | ||
| 7 | 532 40 76-43 | Support, Pivot | ||
| 8 | 532 15 00-78 | Screw, Hex Head 5/16-18 x 3/4 | ||
| 9 | 532 18 45-05 | Spring, De?ector | ||
| 10 | 532 17 98-29 | Bolt, Shoulder | ||
| 11 | 532 17 92-46 | Washer, Friction, Nylon | ||
| 12 | 532 19 17-30 | Nut, Lock 1/4-20 | ||
| 13 | 872 25 05-05 | Bolt, Carriage 5/16-18 | ||
| 14 | 532 75 11-53 | Nut, Lock 5/16-18 | ||
| 15 | 532 40 76-50 | Chute Assembly | ||
| 16 | 532 18 41-13 | Deflector Assembly | ||
| 17 | 532 17 91-45 | Seal, Deflector | ||
| 18 | 532 12 84-15 | Rivet, Blind | ||
| 19 | 532 18 33-33 | Knob, Speed Control Lever | ||
| 20 | 872 27 05-06 | Bolt, Carriage 5/16-18 x 3/4 | ||
| 22 | 874 04 10-24 | Screw #10-24 x 1-1/2 | ||
| 23 | 532 19 24-49 | Control Assembly, Power Steering | ||
| 25 | 532 19 85-41 | Nut, Lock 5/16-18 | ||
| 26 | 532 19 84-74 | Lever Assembly, Speed Control | ||
| 27 | 532 16 96-75 | Retainer, Hairpin | ||
| 28 | 532 18 04-45 | Rod, Upper, Speed Control | ||
| 29 | 532 18 77-16 | Rod, Lower, Speed Control | ||
| 30 | 532 19 27-10 | Clamp, Clean-Out Tool | ||
| 31 | 532 19 21-99 | Tool, Clean-Out |
Handles
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 40 76-49 | Lever, Auger Control, RH | ||
| 2 | 532 40 76-48 | Lever, Traction Drive Control, LH | ||
| 4 | 532 17 88-88 | Bushing, Flange | ||
| 5 | 532 16 96-75 | Retainer, Hairpin | ||
| 6 | 817 06 04-08 | Screw, Hex Head | ||
| 7 | 532 17 86-52 | Rod, Interlock | ||
| 8 | 532 19 95-76 | Arm, Impeller Rod | ||
| 9 | 532 19 95-75 | Arm, Traction Rod | ||
| 10 | 532 19 95-31 | Panel, Control | ||
| 11 | 874 78 05-24 | Screw, Hex Head 5/16-18 x 1-1/2 | ||
| 12 | 874 78 05-28 | Screw, Hex Head 5/16-18 x 1-3/4 | ||
| 13 | 532 18 41-07 | Handle Tube, LH | ||
| 14 | 532 18 41-08 | Handle Tube, RH | ||
| 15 | 532 75 11-53 | Nut, Lock 5/16-18 | ||
| 16 | 819 13 13-16 | Washer, Flat 3/8 | ||
| 17 | 532 17 88-99 | Knob, Handle | ||
| 18 | 532 18 04-80 | Rod, Auger Control | ||
| 19 | 532 18 04-81 | Rod, Traction Control | ||
| 20 | 532 18 04-28 | End, Control Rod | ||
| 21 | 873 35 05-00 | Nut, Hex, Jam 5/16-18 | ||
| 22 | 872 12 06-18 | Bolt, Carriage 3/8-16 x 2-1/4 | ||
| 23 | 532 18 40-87 | Handle Tube, Lower | ||
| 24 | 532 18 04-47 | Sleeve, Spring | ||
| 25 | 532 18 09-26 | Spring, Traction Drive | ||
| 26 | 532 17 86-69 | Spring, Auger Control | ||
| 27 | 817 00 06-16 | Screw, Hex Head 3/8-16 x 1 | ||
| 28 | 532 19 85-59 | Bushing, Pivot Lever | ||
| 29 | 532 19 30-72 | Screw, Grounding | ||
| 30 | 532 18 29-06 | Console, Panel | ||
| 31 | 532 17 52-62 | Screw, Hex Head, Tapping #10-24 x 1-1/4 | ||
| 32 | 532 18 44-71 | Screw, Hex Head, Tapping #10-24 x 1/2 | ||
| 33 | 532 19 95-77 | Latch, Interlock | ||
| 34 | 532 18 35-18 | Bolt, Shoulder | ||
| 35 | 532 06 80-38 | Nut, Lock 1/4-20 | ||
| 36 | 532 17 88-31 | Spring, Torsion | ||
| 37 | 532 19 38-85 | Spring, Interlock | ||
| 38 | 532 17 86-66 | Headlight, Halogen (Includes Bulb) | ||
| - - | 532 40 16-20 | Bulb, Halogen | ||
| 39 | 532 17 86-68 | Bezel, Headlight | ||
| 40 | 532 18 09-64 | Harness, Headlight (Halogen) | ||
| 42 | 532 19 95-78 | Lever, Interlock | ||
| 43 | 532 19 96-38 | Rod, Latch, Interlock | ||
| 44 | 532 19 63-38 | Rod, Arm, Interlock | ||
| 45 | 532 70 02-79 | Clip | ||
| 46 | 532 17 92-46 | Washer, Friction |
Drive
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 2 | 532 75 11-53 | Nut, Lock 5/16-18 | ||
| 4 | 532 19 85-84 | Screw, Hex Head 5/16-18 x 1/2 | ||
| 5 | 532 18 00-17 | Bearing, Flange | ||
| 6 | 532 18 01-34 | Shaft, Auxiliary | ||
| 7 | 532 17 92-70 | Spacer, Plate | ||
| 8 | 532 19 29-07 | Plate, Auxiliary | ||
| 9 | 532 18 00-82 | Gear, Intermediate (12/58) | ||
| 10 | 532 18 00-65 | Gear, Pinion | ||
| 11 | 532 18 77-14 | Rod, Clutch | ||
| 12 | 532 18 00-66 | Shaft, Long, Hex | ||
| 13 | 532 17 88-07 | Pin, Pivot | ||
| 14 | 532 18 40-80 | Lever, Shifter / Wheel | ||
| 15 | 532 17 53-44 | Trunnion Bearing Assembly | ||
| 16 | 532 18 78-57 | Bracket, Pivot, Shift | ||
| 17 | 532 17 98-31 | Ring, Rubber Wheel | ||
| 18 | 532 19 95-09 | Plate, Rubber Wheel | ||
| 19 | 873 93 05-00 | Nut, Lock 5/16-18 | ||
| 20 | 532 17 86-13 | Hub, Rubber Wheel | ||
| 21 | 874 76 05-14 | Screw, Hex Head 5/16-18 x 7/8 | ||
| 22 | 532 08 51-79 | Retainer, Hairpin | ||
| 23 | 532 18 01-35 | Spring, Bias | ||
| 24 | 532 18 00-81 | Gear, Axle (58 Teeth) | ||
| 25 | 532 17 86-95 | Pin, Pivot Lever | ||
| 26 | 532 19 77-63 | Plate Assembly, Drive | ||
| 27 | 532 40 43-07 | Shaft, Axle | ||
| 28 | 532 19 77-64 | Shaft, Short Hex | ||
| 29 | 532 18 40-77 | Lever, Shifter Plate | ||
| 30 | 532 18 40-76 | Bracket, Shifter Support | ||
| 31 | 872 27 05-05 | Bolt, Carriage 5/16-18 x 5/8 | ||
| 32 | 532 18 92-82 | Key, Square 1/4 x 1/4 x 7/8 | ||
| 33 | 532 18 89-09 | Bearing, Flange | ||
| 34 | 532 18 40-75 | Plate, Drive Mounting | ||
| 35 | 532 18 25-04 | Spacer, Bearing | ||
| 36 | 532 19 10-80 | Pulley, Traction Drive | ||
| 37 | 532 19 85-41 | Nut, Lock 5/16-18 | ||
| 38 | 819 11 15-07 | Washer, Flat | ||
| 39 | 532 19 88-52 | Washer, Lock 5/16 | ||
| 40 | 874 95 05-12 | Screw, Hex Head 5/16-18 x 3/4 | ||
| 41 | 812 00 00-12 | Ring, Retaining | ||
| 43 | 532 17 90-95 | Spring, Return | ||
| 44 | 532 18 42-06 | Pin, Roll |
Chassis/Engine/Pulleys
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 18 10-44 | Spring, Traction Idler | ||
| 2 | 532 18 05-22 | Pulley, Idler (2-1/4) | ||
| 3 | Engine, Briggs & Stratton, Model Number 20A114 (order parts from engine manufacturer) | |||
| 4 | 874 78 05-20 | Screw, Hex Head 5/16-18 x 1-1/4 | ||
| 5 | 532 15 00-78 | Screw, Hex Head 5/16-18 | ||
| 6 | 532 05 92-89 | Washer, Flat | ||
| 7 | 532 16 67-85 | Nut, Jam, Lock 5/16-18 | ||
| 8 | 532 17 53-30 | Pin, Idler Pivot | ||
| 9 | 532 40 79-08 | V-Belt, Traction Drive | ||
| 10 | 532 19 85-52 | Washer, Lock 5/16 | ||
| 11 | 532 19 85-84 | Screw, Hex Head 5/16-18 x 1/2 | ||
| 12 | 532 17 92-59 | Impeller Arm / Pad Assembly | ||
| 13 | 532 08 51-79 | Retainer, Hairpin | ||
| 14 | 532 17 88-28 | Spring, Brake | ||
| 15 | 532 40 80-07 | V-Belt, Impeller Drive | ||
| 16 | 532 15 04-06 | Screw, Hex Head 3/8-16 x 1-1/4 | ||
| 17 | 532 18 48-04 | Arm, Idler | ||
| 18 | 874 78 05-24 | Screw, Hex Head 5/16-18 x 1-1/2 | ||
| 19 | 532 19 85-59 | Bushing, Idler Pivot | ||
| 20 | 532 18 05-23 | Pulley, Idler (2-3/4) | ||
| 21 | 874 61 05-16 | Screw, Hex Head 5/16-18 x 1 | ||
| 22 | 532 17 93-71 | Spacer, Engine Pulley | ||
| 23 | 532 18 04-78 | Pulley, Engine, Traction Drive | ||
| 24 | 532 17 91-57 | Pulley, Engine, Impeller Drive | ||
| 25 | 532 40 00-26 | Washer, Flat 3/8 | ||
| 26 | 532 85 02-63 | Washer, Lock, Helical 3/8 | ||
| 27 | 532 85 10-84 | Screw, Hex Head 3/8-24 x 1-3/8 | ||
| 28 | 532 15 54-52 | Guide, Belt | ||
| 29 | 532 19 22-13 | Belt Cover Assembly (Includes Toolbox Cover) | ||
| 30 | 532 17 88-30 | Cover, Toolbox | ||
| 31 | 532 40 05-24 | Screw, Hex Head 1/4-20 x 1/2 | ||
| 32 | 532 17 92-56 | Bolt, Shoulder 5/16-18 | ||
| 33 | 532 18 78-53 | Bellcrank Shifter | ||
| 34 | 532 19 85-80 | Clevis Pin | ||
| 35 | 532 40 54-85 | Arm, Auger Control | ||
| 36 | 873 80 05-00 | Nut, Lock 5/16-18 | ||
| 37 | 532 18 40-86 | Bellcrank | ||
| 38 | 532 18 71-01 | Link, Speed Control | ||
| 39 | 532 19 21-10 | Trunnion, Pivot Bracket | ||
| 41 | 532 70 02-79 | Hairpin, Cotter 3/32 x 1/2 | ||
| 42 | 532 17 90-65 | Pin, Bellcrank | ||
| 43 | 532 18 40-85 | Bracket, Bellcrank | ||
| 44 | 817 00 06-16 | Screw, Hex Head | ||
| 45 | 532 18 40-74 | Pivot Bracket, Impeller Idler Arm | ||
| 46 | 532 18 40-84 | Pan, Frame Bottom | ||
| 47 | 871 02 05-12 | Screw, Hex Head 5/16-18 x 3/4 | ||
| 48 | 532 18 11-56 | Nut, Speed 5/16-18 | ||
| 49 | 532 40 78-63 | Frame Assembly | ||
| 50 | 532 18 80-02 | Plate, Frame End | ||
| 51 | 532 40 61-09 | Shaft, Auger Control | ||
| 52 | 532 05 70-79 | Washer, Hardened | ||
| 53 | 532 19 30-71 | Key, Safety | ||
| 55 | 812 00 00-02 | Ring, Crescent | ||
| 56 | 532 40 39-08 | Mounting Plate, Engine | ||
| 57 | 811 05 05-00 | Washer, Lock, External Tooth 5/16 | ||
| 58 | 532 19 85-63 | Power Cord |
Wheels
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 19 95-01 | Wheel Assembly, 16", Power Steering, LH | ||
| 2 | 532 15 54-43 | Pin, Klik 1/4 | ||
| 3 | 532 40 51-61 | Cover, Power Steering | ||
| 4 | 532 18 44-71 | Bolt, Shoulder #10-24 x 5/8 | ||
| 7 | 817 00 06-16 | Capscrew, Hex Head, Flanged 3/8-16 x 1 | ||
| 8 | 532 18 78-59 | Bracket, Steering Cable, RH | ||
| 9 | 532 18 78-58 | Bracket, Steering Cable, LH | ||
| 10 | 817 60 04-06 | Screw, Hex Head 1/4-20 x 3/8 | ||
| 11 | 532 19 85-84 | Screw, Hex Head 5/16-18 x 1/2 | ||
| 12 | 532 40 60-57 | Link, Steering Lever | ||
| 13 | 532 19 95-19 | Yoke, Steering | ||
| 14 | 532 18 20-15 | Pin, Steering Lever | ||
| 15 | 532 19 95-18 | Bellcrank | ||
| 16 | 532 19 95-12 | Bracket Assembly, LH Steering | ||
| 17 | 532 19 95-11 | Bracket Assembly, RH Steering | ||
| 18 | 532 18 18-47 | Pin, Steering Bellcrank | ||
| 19 | 532 08 51-79 | Retainer, Hairpin | ||
| 20 | 532 18 41-97 | Bracket, Steering | ||
| 21 | 532 19 21-26 | Driver, Wheel | ||
| 22 | 532 18 24-66 | Ring, Wire Retainer | ||
| 23 | 532 18 76-22 | Lobe, Wheel | ||
| 24 | 532 19 49-41 | Slide, Clutch | ||
| 25 | 532 17 91-39 | Spring, Clutch Slide | ||
| 26 | 532 19 49-40 | Lobe, Axle | ||
| 27 | 532 18 92-82 | Key, Square | ||
| 28 | 532 17 46-97 | Washer, Thrust (1") | ||
| 29 | 532 17 98-30 | Bearing, Axle | ||
| 30 | 532 19 38-85 | Spring, Return | ||
| 31 | 532 19 95-02 | Wheel Assembly, 16", Power Steering, RH | ||
| 32 | 532 70 02-79 | Clip, Retainer | ||
| 33 | 812 00 00-45 | Ring, Retaining | ||
| 34 | 532 14 63-15 | Screw, Hex Head 5/16-18 x 5/8 |
Decals
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 532 19 96-83 | Decal, Danger | ||
| 2 | 532 19 21-60 | Decal, Husqvarna | ||
| 3 | 532 19 96-82 | Decal, Danger, Deflector | ||
| 4 | 532 18 40-45 | Decal, Danger | ||
| 5 | 532 19 21-59 | Decal, Husqvarna, 9027STE | ||
| 6 | 532 18 40-30 | Decal, Instruction | ||
| 7 | 532 18 40-36 | Decal, Traction Lever | ||
| 8 | 532 18 40-35 | Decal, Auger Lever | ||
| 9 | 532 18 40-32 | Decal, Speed Control | ||
| 10 | 532 18 40-31 | Decal, Remote Deflector | ||
| 11 | 532 18 39-07 | Decal, LH Trigger | ||
| 12 | 532 18 39-05 | Decal, RH Trigger | ||
| 13 | 532 18 41-24 | Decal, Height Adjustment | ||
| 14 | 532 18 04-33 | Decal, Sound Level | ||
| 15 | 532 18 40-28 | Decal, Belt Guard | ||
| 17 | 532 15 57-94 | Decal, Husqvarna, Crown | ||
| 532 40 69-43 | Operator’s Manual, European | |||
| 532 40 69-47 | Operator’s Manual, Scandinavian | |||
| 532 40 69-46 | Operator’s Manual, East Bloc |