How do I install a new scraper blade on my snow blower?

  1. Park the mower in an appropriate flat surface
  2. Ensure that the engine has been turned off and the ignition key removed before attempting to operate on the front-end of the blower.
  3. Gently tilt back the snow blower and bring it to a rest on its handles down on the floor beside your feet.
  4. Locate and identify the five blades that hold down the main blade to the housing within the auger’s chamber and proceed to unscrew the bolts.
  5. Once you have unscrewed all the bolts, carefully remove the blower’s scraper blade.
  6. Insert the new scraper blade in the right orientation and ensure that all the holes in the scraper bar to the holes in the auger’s housing.
  7. Fasten all the housing’s bolts in place and tighten them securely.